We have teamed up with Sturdy Cycles and put together a wonderful LANDRACE Tupelo build with a selection Tom Sturdy's hand made titanium components.
Sturdy Cycles workshop is in Frome, Somerset and Tom is renowned for his 3D printed road and gravel frames. We are very pleased to be working with a UK based manufacturer.
This Tupelo build includes a CNC machined titanium stem that is compatible with the Chris King Aeroset 3 headset and runs the brake hose internally. It is a similar to the Enve In-route stem. Combined with titanium spacers this is a very neat looking addition. the stem is available in 5mm increments from 80mm to 130mm and 3 different angles: -3, -6 and -9 degrees. the stem in the photos is a -6 degree stem and 110mm long. There is also available a titanium computer mount available that integrates with the stem.
The Sturdy seatpost is a combination of 3D printing and beautifully machined components, it is available in a zero setback and up to 20mm setback in 5mm increments; this means the saddle can be clamped in the centre of the rails in its correct fore-aft position. Nice and easy angle adjustments with the CNC'd two bolt/cradle system.
The CNC'd titanium cranks are a new addition to Tom's product range and are compatible with SRAM chainrings. The cranks are available from 150mm to 180mm in 2.5mm increments. now that is interesting; especially if you are using a 3mm shim for a leg length discrepancy as you can order different length cranks. Jimmy our bike fitter uses different length cranks and so did Marco Pantani; it's worth a conversation. Tom also makes a single titanium chainring if you want a 1x 13 gearing set-up.
We has to include the Sturdy Titanium T47 - Enduro XD15 Bottom Bracket to link the titanium cranks to the titanium frame, they look so good together.
The Titanium bar end caps are the final flourish and look a lot nicer than the cheap plastic options available with the handlebar tape.
The sizing options of the stem, seatpost and cranks are a bike fitter's dream; helping us fine tune the fit without compromise. We are very much looking forward to getting our LANDRACE bikes out on the road with Tom's beautiful and practical components.
To find out more about this bike and our build options please contact us via our Contact Page, or you can call the shop or even drop in to 38 Store Street, to have a look at the bike.
£8795.00 LANDRACE X Sturdy Cycles Complete Bike (wit SRAM Force AXS groupset and LANDRACE x Chris King carbon wheels)
£432.00 Sturdy Titanium stem
£75.00 Sturdy Titanium Computer mount
£932.00 Sturdy Machined Titanium Crankset (165mm)
£360.00 Sturdy Titanium seatpost (27.2/zero setback)
£177.00 Sturdy Titanium T47 Bottom Bracket - Enduro XD15
£75.00 Sturdy Titanium Bar End plugs
